BENZENE LINE,radiocarbon dating equipment, SetUp and Training,
lithium carbide,acethylene,setting up,radiocarbon laboratory, benzene,vacuum pyrolysis,training,teflon vials,benzeneline

Benzene line - List of Equipment

List of equipment set for Chemical Preparation of samples for 14C measurement by Liquid Scintillation Counting (LSC)


Description

Quantity

Benzene Line

 
1. Charring equipment  
1.1. A vertical furnace (1100 watt, 220 volt, up to 1250 oC ) 1
1.2. Stainless steel reaction vessels with cover (3 small, 2 middle, 1 large and 1 performed). 1
1.3. Thermo-destruction gas utilizing reactor. 1
1.4. A mounting for cooling and holding reaction vessels. 1
2 The equipment for lithium carbide production of any kind of sample material  
2.1. A vertical furnace (1100 watt, 220 volt, up to 1250 oC ) 2
2.2. An easily discountable water-cooled hermetized head 1
2.3. Stainless steel cylindrical reaction vessels (5 small , 8 middle and 2 large ) 15
2.4. Titanium liners 10
2.5. Special metal stand with a holder for mounting a vacuum gauge with valves for vacuum, argon and carbon dioxide, with fast cooling system for reactor vessels and with seats for storing clean reactor vessels 1
2.6. Stainless steel holders ( 15 of different sizes ) and vacuum thermo-destruction technology 15
2.7. An auxiliary equipment. 1
2.8.* Equipment set for Capsule technology. (Applicable for small samples) 1
2.9.* Microliner thermodestruction technology set. (Applicable for small samples) 1
2.10.* Autonomous water cooling system for carbide synthesis. 1
2.11.* Guillotine for cutting lithium. 1
3. The equipment for lithium carbide production of carbon dioxide and charcoal  
3.1. CO2 to carbide conversion reaction vessels (5 reactors) 5
3.2. A holder for mounting a vacuum gauge with valves for vacuum, argon and carbon dioxide, with cryogenic-trap for carbon dioxide with quickly weigh system. 4
3.3. An auxiliary equipment. 1
4. The equipment for acetylene production  
4.1. A lithium carbide hydrolysis module large 1
4.2. A lithium carbide hydrolysis module special for micro-samples   1
4.3. The equipment for chemical purification and catching of acetylene 1
4.4. The equipment for chemical purification and catching of acetylene, adapted for micro-samples. 1
5. The equipment for benzene synthesis.   
5.1. Benzene synthesis system (2 modules). Each module consists of: two vacuum manifolds with gauges, Teflon valves, cryogenic traps, reaction vessel with catalyst, and heater-cooler system with temperature controller.  2
5.2. The glass benzene recovery vials with Teflon caps for refining and storage of benzene ( 70 vessels of different sizes )   1
6. The equipment for benzene purification by sublimation.  
6.1 One vacuum manifolds with gauges, Teflon valves and cryogenic traps. 1
6.2. System for fast remove of the Radon 1
7. Vials for long time precise measurement  
7.1. Each vial consists of Teflon ampoule, titanium holder, titanium spring, Teflon cap with pin valve (1.5 ml, 3.0 ml, and 7.0 ml).
Holder may be produced of black Teflon.
40
8. Sets of manuals in English 1
9. On-site installation of equipment and training to the end-user staff.
10. On-site introduction and training of the end-user staff of sample processing and age calculation using ultra low-level LS spectrometer Quantulus 1220.
11.* Extended training of the end-user staff of sample processing and age calculation (Agreed schedule and duration of on-site Or in other laboratory).
12.* Special programm module for C-14 (pMC, age, percent of Modern component, etc.) calculation.

Copyright : 2013 - 2021 BenzeneLine
Page last saved at: 26/08/2021



Wordpress     Wordpress
eXTReMe Tracker